The Figure shows a LAN with three switches, a router using 802.1Q trunking, and VLANs 11 and 13. Subnet 10.1.1.0/24 is on VLAN 11, and subnet 10.1.3.0/24 is on VLAN 13.The STP topology has converged for each VLAN, with SW1 blocking on Fa0/2 for VLAN 11, and SW2 blocking on Fa0/3 for VLAN 13. Assume [...]
May 23, 2011
Subnetting is considered the most important topic in CCNA exam. If you want to pass CCNA exam, you’ll have to understand how to subnet. In this post today, you can pick up the technique and see how you can master of Subnetting from there. This technique requires no charts, just simply the know-how to work with the powers of 2.
April 24, 2011
To configure the router (R2-RC) click on the console host icon that is connected to a router by a serial console cable (shown in the diagram as a dashed black line)
April 24, 2011
This topology contains 3 routers and 1 switch. Complete the topology.
Drag the appropriate device icons to the labeled Device
Drag the appropriate connections to the locations labeled Connections.
Drag the appropriate IP addresses to the locations labeled IP address
January 1, 2012
13 Comments